Last updated
Edit

ledger_entry

[Source]

The ledger_entry method returns a single ledger entry from the XRP Ledger in its raw format. See ledger format for information on the different types of entries you can retrieve.

Request Format

This method can retrieve several different types of data. You can select which type of item to retrieve by passing the appropriate parameters, comprised of the general and type-specific fields listed below, and following the standard request formatting. (For example, a WebSocket request always has the command field and optionally an id field, and a JSON-RPC request uses the method and params fields.)

Note

There is no commandline syntax for this method. You can use the json method to access this method from the commandline instead.

General Fields

FieldTypeDescription
binaryBoolean(Optional) If true, return the requested ledger entry's contents as a hex string in the XRP Ledger's binary format. Otherwise, return data in JSON format. The default is false. Updated in: rippled 1.2.0
ledger_hashString(Optional) A 20-byte hex string for the ledger version to use. (See Specifying Ledgers)
ledger_indexString or Unsigned Integer(Optional) The ledger index of the ledger to use, or a shortcut string (e.g. "validated" or "closed" or "current") to choose a ledger automatically. (See Specifying Ledgers)
include_deletedBoolean(Optional, Clio servers only) If set to true and the queried object has been deleted, return its complete data as it was prior to its deletion. If set to false or not provided, and the queried object has been deleted, return objectNotFound (current behavior).

The generator and ledger parameters are deprecated and may be removed without further notice.

In addition to the general fields above, you must specify exactly 1 of the following fields to indicate what type of entry to retrieve, along with its sub-fields as appropriate. The valid fields are:

Caution: If you specify more than 1 of these type-specific fields in a request, the server retrieves results for only 1 of them. It is not defined which one the server chooses, so you should avoid doing this.

Get Ledger Object by ID

Retrieve any type of ledger object by its unique ID.

FieldTypeDescription
indexStringThe ledger entry ID of a single entry to retrieve from the ledger, as a 64-character (256-bit) hexadecimal string.
{
  "command": "ledger_entry",
  "index": "7DB0788C020F02780A673DC74757F23823FA3014C1866E72CC4CD8B226CD6EF4",
  "ledger_index": "validated"
}

Try it! >

Tip

You can use this type of request to get any singleton ledger entry, if it exists in the ledger data, because its ID is always the same. For example:

  • Amendments - 7DB0788C020F02780A673DC74757F23823FA3014C1866E72CC4CD8B226CD6EF4
  • FeeSettings - 4BC50C9B0D8515D3EAAE1E74B29A95804346C491EE1A95BF25E4AAB854A6A651
  • Recent History LedgerHashes - B4979A36CDC7F3D3D5C31A4EAE2AC7D7209DDA877588B9AFC66799692AB0D66B
  • NegativeUNL - 2E8A59AA9D3B5B186B0B9E0F62E6C02587CA74A4D778938E957B6357D364B244

Get AccountRoot Object

Retrieve an AccountRoot entry by its address. This is roughly equivalent to the account_info method.

FieldTypeDescription
account_rootString - AddressThe classic address of the AccountRoot entry to retrieve.
{
  "id": "example_get_accountroot",
  "command": "ledger_entry",
  "account_root": "rf1BiGeXwwQoi8Z2ueFYTEXSwuJYfV2Jpn",
  "ledger_index": "validated"
}

Try it! >

Get AMM Object

(Requires the AMM amendment)

Retrieve an Automated Market-Maker (AMM) object from the ledger. This is similar to amm_info method, but the ledger_entry version returns only the ledger entry as stored.

FieldTypeDescription
ammObject or StringThe AMM to retrieve. If you specify a string, it must be the object ID of the AMM, as hexadecimal. If you specify an object, it must contain asset and asset2 sub-fields.
amm.assetObjectOne of the two assets in this AMM's pool, as a currency object without an amount.
amm.asset2ObjectThe other of the two assets in this AMM's pool, as a currency object without an amount.
{
  "id": 3,
  "command": "ledger_entry",
  "amm": {
    "asset": {
      "currency": "XRP"
    },
    "asset2": {
      "currency" : "TST",
      "issuer" : "rP9jPyP5kyvFRb6ZiRghAGw5u8SGAmU4bd"
    }
  },
  "ledger_index": "validated"
}

Try it! >

Get Bridge Object

(Requires the XChainBridge amendment )

Retrieve a Bridge entry, which represents a single cross-chain bridge that connects the XRP Ledger with another blockchain.

FieldTypeDescription
bridge_accountStringThe account that submitted the XChainCreateBridge transaction on the blockchain.
bridgeObjectThe Bridge to retrieve. Includes the door accounts and assets on the issuing and locking chain.
{
  "id": "example_get_bridge",
  "command": "ledger_entry",
  "bridge_account": "rnQAXXWoFNN6PEqwqsdTngCtFPCrmfuqFJ",
  "bridge": {
    "IssuingChainDoor": "rHb9CJAWyB4rj91VRWn96DkukG4bwdtyTh",
    "IssuingChainIssue": {
      "currency": "XRP"
    },
    "LockingChainDoor": "rnQAXXWoFNN6PEqwqsdTngCtFPCrmfuqFJ",
    "LockingChainIssue": {
      "currency": "XRP"
    }
  },
  "ledger_index": "validated"
}

Try it! >

Get DirectoryNode Object

Retrieve a DirectoryNode, which contains a list of other ledger objects. Can be provided as string (object ID of the Directory) or as an object.

FieldTypeDescription
directoryObject or StringThe DirectoryNode to retrieve. If a string, must be the object ID of the directory, as hexadecimal. If an object, requires either dir_root or owner as a sub-field, plus optionally a sub_index sub-field.
directory.sub_indexUnsigned Integer(Optional) If provided, jumps to a later "page" of the DirectoryNode.
directory.dir_rootString(Optional) Unique index identifying the directory to retrieve, as a hex string.
directory.ownerString(Optional) Unique address of the account associated with this directory.
{
  "id": 3,
  "command": "ledger_entry",
  "directory": {
    "owner": "rf1BiGeXwwQoi8Z2ueFYTEXSwuJYfV2Jpn",
    "sub_index": 0
  },
  "ledger_index": "validated"
}

Try it! >

Get Offer Object

Retrieve an Offer entry, which defines an offer to exchange currency. Can be provided as string (unique index of the Offer) or as an object.

FieldTypeDescription
offerObject or StringIf a string, interpret as ledger entry ID of the Offer to retrieve. If an object, requires the sub-fields account and seq to uniquely identify the offer.
offer.accountString - Address(Required if offer is specified as an object) The account that placed the offer.
offer.seqUnsigned Integer(Required if offer is specified as an object) The Sequence Number of the transaction that created the Offer entry.
{
  "id": "example_get_offer",
  "command": "ledger_entry",
  "offer": {
    "account": "rf1BiGeXwwQoi8Z2ueFYTEXSwuJYfV2Jpn",
    "seq": 359
  },
  "ledger_index": "validated"
}

Try it! >

Get Oracle Object

(Requires the PriceOracle amendment )

Retrieve an Oracle entry, which represents a single price oracle that can store token prices.

FieldTypeRequired?Description
oracleObjectYesThe oracle identifier.
oracle.accountString - AddressYesThe account that controls the Oracle object.
oracle.oracle_document_idNumberYesA unique identifier of the price oracle for the Account
{
  "id": "example_get_oracle",
  "command": "ledger_entry",
  "oracle" : {
    "account": "rNZ9m6AP9K7z3EVg6GhPMx36V4QmZKeWds",
    "oracle_document_id":  34
  },
  "ledger_index": "validated"
}

Try it! >

Get RippleState Object

Retrieve a RippleState entry, which tracks a (non-XRP) currency balance between two accounts.

FieldTypeDescription
ripple_stateObjectObject specifying the RippleState (trust line) object to retrieve. The accounts and currency sub-fields are required to uniquely specify the RippleState entry to retrieve.
ripple_state.accountsArray(Required if ripple_state is specified) 2-length array of account Addresses, defining the two accounts linked by this RippleState entry.
ripple_state.currencyString(Required if ripple_state is specified) Currency Code of the RippleState entry to retrieve.
{
  "id": "example_get_ripplestate",
  "command": "ledger_entry",
  "ripple_state": {
    "accounts": [
      "rf1BiGeXwwQoi8Z2ueFYTEXSwuJYfV2Jpn",
      "rsA2LpzuawewSBQXkiju3YQTMzW13pAAdW"
    ],
    "currency": "USD"
  },
  "ledger_index": "validated"
}

Try it! >

Get Check Object

Retrieve a Check entry, which is a potential payment that can be cashed by its recipient.

FieldTypeDescription
checkStringThe object ID of a Check entry to retrieve.
{
  "id": "example_get_check",
  "command": "ledger_entry",
  "check": "C4A46CCD8F096E994C4B0DEAB6CE98E722FC17D7944C28B95127C2659C47CBEB",
  "ledger_index": "validated"
}

Try it! >

Get Escrow Object

Retrieve an Escrow entry, which holds XRP until a specific time or condition is met. Can be provided as string (object ID of the Escrow) or as an object.

FieldTypeDescription
escrowObject or StringThe Escrow to retrieve. If a string, must be the object ID of the Escrow, as hexadecimal. If an object, requires owner and seq sub-fields.
escrow.ownerString - Address(Required if escrow is specified as an object) The owner (sender) of the Escrow object.
escrow.seqUnsigned Integer(Required if escrow is specified as an object) The Sequence Number of the transaction that created the Escrow object.
{
  "id": "example_get_escrow",
  "command": "ledger_entry",
  "escrow": {
    "owner": "rL4fPHi2FWGwRGRQSH7gBcxkuo2b9NTjKK",
    "seq": 126
  },
  "ledger_index": "validated"
}

Try it! >

Get PayChannel Object

Retrieve a PayChannel entry, which holds XRP for asynchronous payments.

FieldTypeDescription
payment_channelStringThe object ID of the PayChannel to retrieve.
{
  "id": "example_get_paychannel",
  "command": "ledger_entry",
  "payment_channel": "C7F634794B79DB40E87179A9D1BF05D05797AE7E92DF8E93FD6656E8C4BE3AE7",
  "ledger_index": "validated"
}

Try it! >

Get DepositPreauth Object

Retrieve a DepositPreauth entry, which tracks preauthorization for payments to accounts requiring Deposit Authorization.

FieldTypeDescription
deposit_preauthObject or StringSpecify the DepositPreauth to retrieve. If a string, must be the ledger entry ID of the DepositPreauth entry, as hexadecimal. If an object, requires owner and authorized sub-fields.
deposit_preauth.ownerString - Address(Required if deposit_preauth is specified as an object) The account that provided the preauthorization.
deposit_preauth.authorizedString - Address(Required if deposit_preauth is specified as an object) The account that received the preauthorization.
{
  "id": "example_get_deposit_preauth",
  "command": "ledger_entry",
  "deposit_preauth": {
    "owner": "rf1BiGeXwwQoi8Z2ueFYTEXSwuJYfV2Jpn",
    "authorized": "ra5nK24KXen9AHvsdFTKHSANinZseWnPcX"
  },
  "ledger_index": "validated"
}

Try it! >

Get Ticket Object

Retrieve a Ticket entry, which represents a sequence number set aside for future use. (Added by the TicketBatch amendment)

FieldTypeDescription
ticketObject or StringThe Ticket to retrieve. If a string, must be the ledger entry ID of the Ticket, as hexadecimal. If an object, the account and ticket_seq sub-fields are required to uniquely specify the Ticket entry.
ticket.accountString - Address(Required if ticket is specified as an object) The owner of the Ticket.
ticket.ticket_seqNumber(Required if ticket is specified as an object) The Ticket Sequence number of the Ticket to retrieve.
{
  "id": "example_get_ticket",
  "command": "ledger_entry",
  "ticket": {
    "account": "rf1BiGeXwwQoi8Z2ueFYTEXSwuJYfV2Jpn",
    "ticket_seq": 389
  },
  "ledger_index": "validated"
}

Try it! >

Get NFT Page

Return an NFT Page in its raw ledger format.

FieldTypeDescription
nft_pageStringThe ledger entry ID of an NFT Page to retrieve.
{
    "id": "example_get_nft_page",
    "command": "ledger_entry",
    "nft_page": "255DD86DDF59D778081A06D02701E9B2C9F4F01DFFFFFFFFFFFFFFFFFFFFFFFF",
    "ledger_index": "validated"
}

Try it! >

Response Format

The response follows the standard format, with a successful result containing the following fields:

FieldTypeDescription
indexStringThe unique ID of this ledger entry.
ledger_indexUnsigned IntegerThe ledger index of the ledger that was used when retrieving this data.
nodeObject(Omitted if "binary": true specified.) Object containing the data of this ledger entry, according to the ledger format.
node_binaryString(Omitted unless "binary":true specified) The binary representation of the ledger object, as hexadecimal.
deleted_ledger_indexString(Clio server only, returned if include_deleted parameter is set.) The ledger index where the ledger entry object was deleted.

An example of a successful response:

{
  "id": "example_get_accountroot",
  "result": {
    "index": "13F1A95D7AAB7108D5CE7EEAF504B2894B8C674E6D68499076441C4837282BF8",
    "ledger_hash": "31850E8E48E76D1064651DF39DF4E9542E8C90A9A9B629F4DE339EB3FA74F726",
    "ledger_index": 61966146,
    "node": {
      "Account": "rf1BiGeXwwQoi8Z2ueFYTEXSwuJYfV2Jpn",
      "AccountTxnID": "4E0AA11CBDD1760DE95B68DF2ABBE75C9698CEB548BEA9789053FCB3EBD444FB",
      "Balance": "424021949",
      "Domain": "6D64756F31332E636F6D",
      "EmailHash": "98B4375E1D753E5B91627516F6D70977",
      "Flags": 9568256,
      "LedgerEntryType": "AccountRoot",
      "MessageKey": "0000000000000000000000070000000300",
      "OwnerCount": 12,
      "PreviousTxnID": "4E0AA11CBDD1760DE95B68DF2ABBE75C9698CEB548BEA9789053FCB3EBD444FB",
      "PreviousTxnLgrSeq": 61965653,
      "RegularKey": "rD9iJmieYHn8jTtPjwwkW2Wm9sVDvPXLoJ",
      "Sequence": 385,
      "TransferRate": 4294967295,
      "index": "13F1A95D7AAB7108D5CE7EEAF504B2894B8C674E6D68499076441C4837282BF8"
    },
    "validated": true
  },
  "status": "success",
  "type": "response"
}

Possible Errors

  • Any of the universal error types.
  • deprecatedFeature - The request specified a removed field, such as generator.
  • entryNotFound - The requested ledger entry does not exist in the ledger.
  • invalidParams - One or more fields are specified incorrectly, or one or more required fields are missing.
  • lgrNotFound - The ledger specified by the ledger_hash or ledger_index does not exist, or it does exist but the server does not have it.
  • malformedAddress - The request improperly specified an Address field.
  • malformedCurrency - The request improperly specified a Currency Code field.
  • malformedOwner - The request improperly specified the escrow.owner sub-field.
  • malformedRequest - The request provided an invalid combination of fields, or provided the wrong type for one or more fields.
  • unknownOption - The fields provided in the request did not match any of the expected request formats.